Blade Insert Case – NEW!
NEW BLADE CASE FOR BLADE INSERTS OF PAST AND CURRENT
MODELS OF V-SLICER
Two blade inserts can be put into this BLADE CASE and locked in.
It then can be stored in a draw or left to stand on the tee. Water
drops can drip down into the tee through the holes in the base of
the BLADE CASE and then the BLADE CASE can be taken out and the
water collected in the tee can be tipped out.
Remember that the V4 V-Slicer is the only V-Slicer model that you
can put the slicing insert in a locked position that leaves
it’s surface slightly above the v-blade so that it
is totally safe.
*So if you buy the blade case for your two blade inserts,
your V4 Slicer system is totally safe.
For other V-Slicers (e.g. Trend Line) you still need the storage
rack for that model to safely store the main V-Frame in
a locked position in the front of the storage rack and you
can store the julienne insert and the 7mm chipper insert
in the back compartments of the storage rack.
But if you buy the optional blade inserts (i.e. the 1.6mm
and the 10mm blade inserts) as well, you may consider buying
the BLADE CASE for these extra two blade inserts.
This allows you to safely store any of the two blade inserts
with the V-Slicer main frame (with the slicer insert in
the main frame) in the standard storage rack and the remaining
two blade inserts can be stored in the BLADE CASE.
N.B. If you do not have or want the storage rack for the Trend
V-Slicer at least buy the BLADE CASE for the blade inserts
you have! These blade inserts stored in a draw is an accident
waiting to happen! Buy before the accident, not after!
PRICE: (NZD) $20-00 + $5-00 Shipping
PRICE: (NZD) $16-00 + $5-00 Shipping
SAVINGS: (NZD) $4-00